Vehicle Loop Detector
![]() |
Loop Diagnostics |
![]() |
![]() |
Loop Isolation Transformer | |
![]() |
Loop Conditioner | |
![]() |
Aluminum RF Shield Housing | |
![]() |
Surge Portection | |
![]() |
Loop Frequences Counter | |
![]() |
10 Gold Plated Sensitivity Controls | |
![]() |
8 Gold Plated Function Controls | |
![]() |
6 Gold Plated & Sealed Controls for Frequency, Reset & Frequency Counter | |
![]() |
Two High Intensity LED Indicators |
Technical Specifications | ||
Power: | The detector is available in the following voltages, 12V AC/DC, 24V AC, 24V DC, 110 AC. | |
Low Power: | Detector is availabe with maximum current draw of 60mA | |
Temperature: | -40 F to +180 F | |
Environmental Protection | Circuit Board is conformally Coated | |
Enclosure: | Extruded
anodized aluminum, Height= 3.25 inches 83 mm - Width= 2.56 inches 40 mm- Depth = 3.65 inches 90 mm |
|
Output Relays | 5A/125 V AC standard version, 1A/125 V AC low current version | |
Connector: | 86 CP11 compatible with 11 pin Octal DIN rail mountable socket or wire harness | |
Surge Protection: | The detector is protected with neon discharge lamps, zenner diods and surg arrestors | |
Loop Input: | Transformer isolated | |
Grounded Loop: | The Loop insolation transformer allows operation with poor quality loops | |
Loop Inductance Range | 20 to 2000 microhenries with Q factor of 5 or higher | |
Tuning: | Detector automatically tunes to the loop after power application or reset | |
Tracking: | Detector automatically tracks and compensates for environmental changes | |
Power Indicator: | Green LED solid light indicates power | |
Loop Failure Indicator: | Green LED blinks indicates loop problem | |
Loop Failure Memory: | Green LED blinks with fast consective blinks indicates past loop problem that healed | |
Detect Indicator: | Red LED Solid light indicates detection | |
Extend Indicator: | Red LED Blinks after a car left the loop indicates time extend feature | |
Sensitivity: | Is set by 10 position rotary switch | |
Frequency: | Is set three positon toggle switch | |
Infinite Presence Mode: | DIP switch selectable presence | |
Limited 4 Minutes: | DIP switch selectable presence | |
Presence Time: | DIP switch selectable | |
Secod Presence Relay: | DIP switch selectable | |
Pulse on Exit / Entry: | DIP switch selectable | |
Fail Safe / Secure: | DIP switch selectable | |
Filter: | DIP switch selectable 2 Seconds | |
Extended Detection: | DIP switch selectable 3, 6, and 9 seconds |
Automatic gate openers are our business. Call us with further questions we are pleased to serve you. (800) 878-7829
8500
Hadden Rd. � Twinsburg O4408741 �
Phone 800/878-7829 � FAX 330/650-9004
or email us at Customer Service