Lightweight Snow and Warning Barrier Fence has been designed for higher visibility as well as greater wind loading. This make the SL 25 Snow and Barrier Fence useful as both a warning fence and a lightweight snow fence.

Application

Airports
Excavation
Snow Areas
Or any place where high visibility is a must.

Material: High density polyethylene
Ultraviolet resistance: Fully stabilized
Temperature range: -60 degrees F. to 180 degrees F
Tensile yield: 3200 psi
Ultimate tensile strength: 2600 psi
Elongation at break: 150%

• T-Posts should be placed a maximum of 10 feet apart
• Vertical Strand of fence should be sandwiched between flat side of T-Post and a 1" x 2" wood slat
• Wire Ties or plastic cable ties can then be used to secure the slat and fence strand to the T-Post.

• To Connect Fence Sections, Overlap 2 strand section from each end and weave a 1" x 2" slat through the overlapped strands
• Fence should be tensioned by hand only
  DO NO USE MECHANICAL TENSIONERS.
  

Styles and Product Specifications